-
+352 26 55 03 43+352 26 55 03 43
-
Monday - Friday: 8:00-12:00 13:00-17:00
-
ContactContact
It is essential to call a professional for these installations. Often it is an annual contract with a heating engineer, who reminds you every year when it is necessary to service your boiler and who can include additional services, such as troubleshooting and especially optimizing the settings of the installation.
Check the boiler, make the necessary adjustments for its proper functioning and clean it if needed. Depending on the type and age of the collective boiler, the technician will evaluate its energy and environmental performance, comparing it with the most efficient boilers on the market today. This includes its nominal efficiency and its emissions of atmospheric pollutants. Specifically, NOx (nitrogen oxides) for gas and oil boilers, and VOCs (volatile organic compounds) and dust for wood and other biomass boilers.
The ideal would be to set the temperature between 19 and 21 °C in living rooms, and 17 °C at night and during the day for less occupied rooms. It is also recommended to lower the heating by 3 to 4 °C if absent for more than 2 hours.
Within fifteen days following their visit, the professional provides a maintenance certificate that the co-ownership must keep for at least two years in order to present it during an inspection or upon request by the insurance in case of a claim.
The certificate provided by the professional must include:
• The list of operations performed and defects corrected during the maintenance visit;
• If necessary, the measured carbon monoxide level;
• The result of the evaluation of the boiler’s energy and environmental performance: efficiency and emissions of atmospheric pollutants;
• Advice on how to best use the boiler and heating installation.
Lowering the heating by 1 °C can reduce consumption by 7%. To control your heating system, installing a regulation and programming system is one of the most effective alternatives.
Thermostatic valves, room thermostats, outdoor sensors… These devices can reduce consumption by an additional 5 to 15%. Enough to make real savings on your energy bill!
Chimney sweeping of smoke evacuation ducts is not mandatory for so-called sealed boilers (flue boilers, VMC-gas…). However, during boiler maintenance, the professional must check the tightness of the duct and clean the connection duct. A blocked or non-tight duct can indeed lead to carbon monoxide poisoning. It is therefore necessary to remove deposits accumulated on the inner walls and facilitate smoke evacuation.
Over time, the pipes allowing the circulation of heating hot water within the building become clogged. Several signs can help detect this sludge buildup, such as colder zones on the radiators or unusual noises in the heating circuit and the boiler. Another characteristic sign: if the purged water from the radiators is not clear but orange or black. Finally, difficulty in obtaining a correct temperature, despite a boiler running at full capacity, should also be a warning.
Performing a descaling will also help reduce energy consumption, and therefore heating costs. Indeed, just one millimeter of scale reduces the efficiency of the boiler and radiators by 5 to 10%. And the overconsumption caused by the sludge can reach 15%. Thus, the heating equipment will be better preserved, leading to an extended lifespan of the boiler and the entire network. Not to mention greater daily comfort, due to less difficulty in heating the homes.
The appearance of leaks is, however, the main risk of such an operation. The sludge stuck to the walls can sometimes seal a leak, most often in old installations. This will then need to be repaired immediately before refilling with water.
During their visit, the professional checks the condition and operation of the heating system, performs a cleaning, and can adjust the settings to optimize it, thus allowing all co-owners and tenants to save on their expenses.