-
+352 26 55 03 43+352 26 55 03 43
-
Monday - Friday: 8:00-12:00 13:00-17:00
-
ContactContact
Thermal comfort is a sensation related to heat that is unique to each individual. In winter, good thermal comfort should ensure adequate warmth. In summer, this warmth should be limited to avoid the sensation of overheating. To achieve “good” thermal comfort, we offer to study your existing installation and building to then propose the most suitable solution for your situation.
Heat pumps have been very successful for years now, they are the heating system that equips all new constructions. This is partly because heat pumps use electricity, which is an easily available energy source that does not require storage. Additionally, they are the only heating system capable of returning more energy than they consume. However, this does not make them a “magic” system suitable for all situations. Moreover, there are many types of models: air/air, air/water, geothermal.
Gas heating is the most installed equipment in individual houses and apartments. In recent years, the condensing boiler has established itself as the most efficient system for utilizing this fuel.
A condensing gas boiler is more efficient than a traditional gas boiler because it exploits the latent heat of the flue gases by condensing them, thus additional heat can be obtained and the boiler’s efficiency improved.
The hybrid combines an air-water heat pump technology and a gas condensing boiler to ensure optimal efficiency. They use an optimal combination of renewable energy and traditional energy to heat your home and even produce hot water.
The control unit parameters can be adapted to any situation on the energy market to always select the most favorable and efficient operating mode in case of energy price fluctuations.
Underfloor heating is a fairly old technique, as it was already found more than thirty years ago. However, today underfloor heating systems are supplied with “low temperature” water, i.e., around 30-25°C.
These water temperature regimes that are (and must be) used perfectly match the capabilities of heat pumps as well as low-temperature and condensing boilers.
Some heat pumps are said to be reversible, meaning they can provide cooling in the summer. This type of system is perfectly compatible with underfloor heating.
Finally, there are now screed grooving techniques that allow the installation of underfloor heating even in renovation projects.
Depending on the configuration of your home, you can decide to keep existing radiators and connect them to a suitable boiler model, or choose new radiator models that combine energy performance and aesthetics. We offer a wide selection from the largest brands as well as manufacturers known for their design combined with very high quality.
The hydraulic stove, also known as a hydro stove, boiler stove, or boiler stove, is aimed at people who want to enjoy the comfort and conviviality provided by wood heating while optimizing their heating bill. The particularity of the hydraulic stove is that it can be connected to a central hot water heating system or to an underfloor or wall heating system. The water is heated by means of a coil or heat exchanger. The heated water is injected into the circuit when it reaches a temperature of 60°. A buffer tank regulates heat production. The surplus can be used to produce domestic hot water or ensure the operation of radiators when the stove is off. The tank also prevents overheating in the room where the appliance is installed.
The government offers a set of support measures aimed at encouraging energy renovation and promoting heating systems that favor renewable energies. When replacing a gas or oil boiler with a heat pump, the following aids may be available under certain conditions:
26 55 03 43
